American Gate Entry Systems

Model VS-GSWG - Swing Gate Operator

Description

The Linear/OSCO Model VS-GSWG is a heavy-duty variable speed swing gate operator designed for smooth, secure and reliable operation of large, heavy swing gates. The positive locking linear drive arm design provides enhanced security, plus increased ability to withstand high wind loads - especially important for large, heavy gates. The VS-GSWG features the same proven and reliable UL325/UL991 compliant solid state control circuitry as the rest of the Linear/OSCO family of gate operators and is available in 1/2, 1 or 2 HP, 115V-460V single- or three-phase power. The VS-GSWG utilizes an inherent current sensing system for entrapment protection and is listed for use in UL class I-IV applications.

Cabinet

Weather-resistant galvannealed steel cabinet with powder coat finish

Lockable, gasketed, hinged and removable front cover for easy access

Mechanical

Heavy-duty 60:1 right-angle C-face gear reducer

Adjustable torque limiter

Linear drive arm

Heavy-duty pillow-block bearings

Mounting

3 - 3 1/2" OD post mounting

Optional pad mounting pedestal available

Anti-Entrapment/Detection Devices

Operator is pre-wired to accept contact and non-contact detection devices such as contact edges and/or photo electric eyes.

Manual Release

Manual release is located inside the operator enclosure

Warning Signals

Warning beeper to sound when gate is moving

Electrical

Variable speed - soft start/soft stop programmable through an inverter motor control (voltage & phase of input power supply required at time of order)

Available from 1/2 to 2 HP industrial continuous-duty, three-phase, 56-frame motor

Available in all standard voltages and phases

Run timer for clutch and motor protection

Delay on reverse

Easily convertible right hand/left hand

Solid state control circuit

Double C-face brake

Power on/off switch

Duplex receptacle on 115 VAC units

Three-button control station included

Accessory connections are 24-volt AC or DC

Easily adjustable rotary limit switches

Full system capable for access controls and reversing devices

VS-GSWG Series Swing Gate Operator Specifications