Operators - SW Series Swing Gate Operators
SW Series - Swing Gate Operator
- Solid State Control Circuitry
- All SW Series operators utilize a common UL325/UL991 compliant 24VDC control board
- Fully featured board for complete access control, security and entrapment protection
- Polyethylene Cover
- The sleek and sturdy lockable cover is available in black, tan or granite with a lockable steel access door
- Heavy Duty Components
- Gear reducer and pillow block bearing provides smooth, reliable and quiet power transmission
- High starting torque - heavy duty PSC motors
- Standard Convenience Features
- Exterior reset button
- Power on/off button
- Accessory power outlet on 115V operators
- 3-button station
- Master/slave compatible - LH/RH selectable
- Easily accessible control box and limit switches
- Quick disconnect crank assembly
- Electrical/power disconnect
- Accepts all accessories
- Footprint 18.31" x 22.64"
SW Series Swing Gate Operator Specifications
| Model | HP | Voltage (Single Phase) | Drive Type | Maximum Gate Length | Maximum Gate Weight | Gate Speed | Maximum Cycles |
| SWC-2 | 1/2 | 115 or 230V | crank | 17' | 1000 lbs | 10"/sec | Continuous Duty |
| SWC-1 | 1 | 115 or 230V | 24 VDC Solar Optional | crank | 19' | 10"/sec | Continuous Duty |
| SWD-211 | 1/2 | 115V/24VDC (solar optional) | crank | 18' | 1000 lbs | 10"/sec | Continuous Duty |
| SWR-211 | 1/2 | 115V | 24 VDC Solar Optional | crank | 15' | 10"/sec | Continuous Duty |
| SWR-221 | 1/2 | 230V | crank | 15' | 1700 lbs | 10"/sec | Continuous Duty |
- Electrical Features
- Inherent entrapment sensing system featuring dual multi-turn precision potentiometers for accurate adjustment and enhanced safety
- Continuous-tone entrapment alarm with reset button
- Integrated warning beeper during gate movement
- 15 diagnostic LEDs on board for ease of setup and troubleshooting
- Selectable pre-start alarm with provision for ADA compliant visual prestart and run alarm
- AC and DC power available for access control accessories
- Integrated maximum run and auto close timer (0-124 sec)
- Built-in master/slave capability using 3-wire shielded cable
- Mechanical Features
- Heavy-duty zinc-plated steel chassis
- Sleek and sturdy UV-stabilized polyethylene cover
- Universal pad mount standard - optional post mount kit available
- Model SLD Exclusive Features
- Full DC-powered operator with built-in battery backup
- Continuous duty 1/2 HP DC permanent magnet motor
- Powered by 115V or 24VDC supply
- Seamless transition to battery backup mode when AC power fails
- Selectable fail-safe or fail-secure modes of operation
- Solar power capable