Operators
SL Series - Slide Gate Operator
- Rotary Mechanical Limits
- Located conveniently inside the control box
- Solid State Control Circuitry
- All SL series operators utilize a common UL325/UL991 compliant 24VDC control board
- Fully featured board for complete access control, security and entrapment protection
- Polyethylene Cover
- The sleek and sturdy lockable cover is available in black, tan or granite
- Manual Disconnect
- Secure and easy to use, allows manual operation of gate during power failure or emergencies
- Optional remote cable kit available for outside-the-gate access
- Heavy Duty Components
- Gear reducer and pillow block bearing provides smooth, reliable and quiet power transmission
- Standard Convenience Features
- Exterior reset button
- Power on/off button
- Accessory power outlet on 115V machines
- 3-button station
SL Series Slide Gate Operator Specifications
| Model | HP | Voltage (Single Phase) | Drive Type | Maximum Gate Length | Maximum Gate Weight | Gate Speed | Maximum Cycles | |
| SLC | SLC-2 | 1/2 | 115 or 230 V | #41 Chain | 37 ft | 1000 lbs | 11"/sec | Continuous |
| SLC-1 | 1 | #40 Chain | 45 ft | 2000 lbs | ||||
| SLD | SLC-211 | 1/2 | 24 VDC Solar Optional | #41 Chain | 25 ft | 700 lbs | 8"/sec | 30/Hour |
| SLR | SLC-211 | 1/2 | 115 V | #41 Chain | 25 ft | 700 lbs | 8"/sec | 150/Day |
| SLC-221 | 1/2 | 230 V | ||||||
- Electrical Features:
- Inherent entrapment sensing system featuring dual multi-turn precision potentiometers for accurate adjustment and enhanced safety
- Continuous-tone entrapment alarm with reset button
- Integrated warning beeper during gate movement
- 15 diagnostic LEDs on board for ease of setup and troubleshooting
- Selectable pre-start alarm with provision for ADA compliant visual prestart and run alarm
- AC and DC power available for access control accessories
- Integrated maximum run and auto close timer (0-124 sec)
- Built-in master/slave capability using 3-wire shielded cable
- Mechanical Features:
- Heavy-duty zinc-plated steel chassis
- Easily operated emergency manual disconnect handle
- Sleek and sturdy UV-stabilized polyethylene cover
- #41 drive chain - 31' included with the operator
- Universal pad mount standard - optional post mount kit available
- Model SLD Exclusive Features:
- Full DC-powered operator with built-in battery backup
- Continuous duty 1/2 HP DC permanent magnet motor
- Powered by 115V or 24VDC supply
- Seamless transition to battery backup mode when AC power fails
- Selectable fail-safe or fail-secure modes of operation
- Solar power capable