Operators - GSLG-A Slide Gate Operator
Model GSLG-A - Slide Gate Operator
- Cabinet:
- Weather-resistant galvannealed steel cabinet with powder coat finish
- Lockable, gasketed, hinged and removable front cover for easy access
- Mechanical:
- Heavy-duty 15:1 right-angle C-face gear reducer
- #50 roller chain and sprocket
- Adjustable torque limiter
- Heavy-duty pillow-block bearings
- Mounting
- 3 - 3 1/2" OD post mounting
- Optional pad mounting pedestal available
- Anti-Entrapment/Detection Devices:
- Operator is pre-wired to accept contact and non-contact detection devices such as contact edges and/or photo electric eyes.
- Manual Release:
- Manual release is easily accessible
- Control Circuit:
- Solid state circuit board, 24 VDC
- Inherent current sensing system
- 15 LEDs for easy setup and troubleshooting
- Built in maximum run timer and auto close timer
- Right-hand/left-hand easy conversion
- Master/Slave - simple three-wire connection
- Entrapment alarm
- Warning Signals:
- Continuous tone entrapment alarm
- Warning beeper to sound when gate is moving
- Pre-start audio/visual outputs included
- Electrical:
- 1/2, 3/4 or 1 HP, 115 or 230 VAC, single phase, thermally protected, heavy duty C-face PSC motor; 1/2, 3/4 or 1 HP, 230 or 460 VAC, 3 phase heavy duty motor
- Double C-face brake
- Power on/off switch
- Emergency stop/reset button on front cover
- Duplex receptacle on 115 VAC units
- Three-button control station included
- Accessory connections are 24-volt AC or DC
- Easily adjustable rotary limit switches
- Full system capable for access controls and reversing devices
SL Series Slide Gate Operator Specifications
| Model | HP | Voltage-Single Phase (Voltage-Three-Phase) | Maximum Gate Length | Maximum Gate Weight | Gate Speed | Shipping Weight |
| GSLG-A-2 | 1/2 | 115/230V (230/460V) | 45' | 1100 lbs | 12"/sec | 365 lbs |
| GSLG-A-4 | 3/4 | 115/230V (230/460V) | 60' | 1400 lbs | 12"/sec | 370 lbs |
| GSLG-A-1 | 1 | 115/230V (230/460V) | 78' | 2200 lbs | 12"/sec | 375 lbs |